WARDOGS fire controlRange / Bearing / Elevation

SPH-2 artillery.
Go the distance.

Plot your SPH-2 and target on the WARDOGS grid. Get the range, compass bearing and low or high arc elevation for your next fire mission.

Plot coordinates

1.00 grid = 100 m

Artillery positionYour current X / Y

X / EAST Y / NORTH

Target positionEnemy X / Y

X / EAST Y / NORTH

Before you fire

Park on level ground and stabilize the gun. Check the tilt markers beside the vehicle silhouette in the gunner sight.

Est. range780–2,629 m

Elevation20–1,390 MIL

Fire solution

Awaiting input

NESW

---°

RNG --- meters

Direction---°Bearing from north

Low arc / MIL---From 1,181 m

High arc / MIL---780–2,629 m

TARGET OFFSET / ΔX · ΔY —

Estimated MIL on the in-game sight. Flat-ground table; confirm with a ranging shot.

Field note Range and bearing use 100-meter grid units. MIL values are interpolated from a community firing table and rounded to whole MIL. Terrain height, vehicle tilt and shell spread are not corrected here. Recheck your coordinates after moving the tank.

SPH-2 / Quick guide

WARDOGS arty tank range, bearing and MIL.

The SPH-2 is WARDOGS’ mobile artillery platform. Range tells you how far, bearing points the gun, and MIL sets its elevation.

01Set the position
Level and stabilize the SPH-2. Enter its current X/Y map coordinates.
02Plot and aim
Enter the target coordinates. Read the bearing and choose an available low or high arc MIL value.
03Range and correct
Fire one round, observe the impact and adjust. Reload using the game’s prompts; update your position after relocating.

Field answers

SPH-2 artillery calculator FAQ

How do I aim the SPH-2 in WARDOGS?

Park on flat ground, stabilize the gun, then enter the vehicle and target X/Y coordinates. Rotate to the bearing and set one of the available MIL elevations on the gun sight. Observe the first impact and adjust.

What is the SPH-2’s range?

This community table covers an estimated 780–2,629 meters on level ground. Low arc is available from 1,181 meters; shorter supported shots use high arc only. Game updates and terrain can affect actual range.

Should I use low arc or high arc?

The SPH-2 can have two elevation solutions for the same target. Low arc follows a shallower path; high arc follows a steeper path. Choose an available arc for your firing position and check that terrain or buildings do not block the shot.

Why can a shot land off target?

The table assumes flat ground. Uneven vehicle placement, target height differences and spread can affect impact. Level the vehicle using the sight’s tilt markers, confirm the coordinates and correct from a ranging shot.

Where do the MIL values come from?

The SPH-2 firing table comes from Apollyon’s open-source WARDOGS calculator, checked October 5, 2026. We interpolate between its range samples and show whole in-game MIL. At the maximum-range plateau, this tool uses 620 MIL for high arc.

Community data, checked October 5, 2026: SPH-2 firing table · Vehicle leveling guide · MIT attribution